Automate AM1.5 Installation Guide

© 2005 Directed Electronics, Inc. Vista, CA N427A 01-05AM1AM1 Security Systeminstallation guide

8© 2005 directed electronics, inc.finding a parking light wireThe parking light wire is often found near the switch. Many cars have the switch builtin

© 2005 directed electronics, inc.94. Turn on the parking lights. If your meter shows (+)12V, turn off the parking lightsand make sure it goes back to

10© 2005 directed electronics, inc.main harness wire connection guidemain harness wiring diagram____________________________________main harness wirin

© 2005 directed electronics, inc.11IIMMPPOORRTTAANNTT!!Never interrupt any wire other than the starter wire.HH11//22 WWHHIITTEE lliigghhtt ffllaasshh

12© 2005 directed electronics, inc.HH11//33 WWHHIITTEE//BBLLUUEE nnoo ffuunnccttiioonn..HH11//44 BBLLAACCKK//WWHHIITTEE ((--)) 220000 mmAA ddo

© 2005 directed electronics, inc.13HH11//66 BBLLUUEE ((--)) iinnssttaanntt ttrriiggggeerr::This input will respond to a negative input with an

14© 2005 directed electronics, inc.HH11//1100 BBRROOWWNN ((++)) ssiirreenn oouuttppuutt::This output can be used if an optional siren isinstal

© 2005 directed electronics, inc.15auxiliary harness wire connection guideauxiliary harness wiring diagram_____________________auxiliary harness wirin

16© 2005 directed electronics, inc.vehicles operate this way. If this is the case connect the RED wire to the passengerunlock motor wire. When testing

© 2005 directed electronics, inc.17BLUE wire then the alarm zones are bypassed (See Feature menu 1/8) and willremain bypassed until the ground input i

trademarks and copyrightsBitwriter®, Clifford®, Code-Hopping®, Directed®, Doubleguard®, ESP®, FailSafe®, Ghost Switch®, Learn Routine™,Nite-Lite®, Nui

18© 2005 directed electronics, inc.external relays—driver’s door unlockThis system is used in many four-door GM sedans. To test for this type of syste

© 2005 directed electronics, inc.19no priority—driver’s door unlockThis type of keyless entry system is common in import vehicles as well as many Jeep

20© 2005 directed electronics, inc.door lock harness wire connection guideThese door lock outputs are for Passive arming control of the factory door l

© 2005 directed electronics, inc.21four-pin optional sensor harnessRED wireThe red wire supplies constant power to the optional sensor.BLACK wireThe b

22© 2005 directed electronics, inc.to learn lock:NNOOTTEE::Make sure the doors, hood and trunk are closed so the factory RKE system oper-ates as it wo

© 2005 directed electronics, inc.23NNOOTTEE::If the Unlock learn was unsuccessful, the Unlock procedure can be repeatedby using the LOCK learn procedu

24© 2005 directed electronics, inc.internal programming jumperA 10A fuse is used as both a fuse and a program jumper. This jumper determines thelight

© 2005 directed electronics, inc.25long term event historyThe control module will store the last 2 triggers in memory that are not erased whenthe igni

26© 2005 directed electronics, inc.feature programmingThe feature programming routine is used to access and change any of the feature set-tings in the

© 2005 directed electronics, inc.27once a feature is programmedzAnother feature(s) can be programmed.zThe other feature menu can be selected.zThe Lear

© 2005 directed electronics, inc.icontentswhat is included . . . . . . . . . . . . . . . .3control module . . . . . . . . . . . . . . . .3installatio

28© 2005 directed electronics, inc.Bitwriter®ONLY featuresDue to memory limitations for this system, the following features can only be pro-grammed us

© 2005 directed electronics, inc.29features #1 menuFactory default settings are shown in bboolldd.Feature steps 5 and 6 are related. Only if Auxiliary

30© 2005 directed electronics, inc.features #2 menuFactory default settings are shown in bboolldd.NNOOTTEE::Feature step number 6 and 7 are not applic

© 2005 directed electronics, inc.31master dealer remotesA master dealer remote can be programmed into the system for demonstration pur-poses. Generall

32© 2005 directed electronics, inc.5. RReelleeaassee..Once the transmitter is learned, the integrated LED/Valet®switch can be released.When installing

© 2005 directed electronics, inc.33troubleshootingstarter kill does not work:zIs the correct starter wire being interrupted? If the car starts when th

34© 2005 directed electronics, inc.I can get into programming and change the feature settings,but when I use the remote the settings seem to change.•

© 2005 directed electronics, inc.35Feature Programming routine does not work, the unit enters thelearn routine then chirps and exits.• Check the Door

36© 2005 directed electronics, inc.

© 2005 directed electronics, inc.37wiring quick reference guideRED/WHITE (-) 200mA Auxiliary Channel/ Delayed Accessory Outpu

ii© 2005 directed electronics, inc.

© 2005 directed electronics, inc.3what is includedzControl modulez4-pin sensor harnessz12-pin main harnesszIntegrated LED/Valet switchz7-pin door moni

4© 2005 directed electronics, inc.Do not disconnect the battery if the vehicle has an anti-theft coded radio. If equippedwith an airbag, avoid disconn

© 2005 directed electronics, inc.5zSolderless terminal crimperszDrill bit setzCordless power drillzPhillips head screwdriverzTorx driver setzWork ligh

6© 2005 directed electronics, inc.integrated LED/Valet®switchThings to remember when positioning the integrated LED/Valet®switch:• It should be visibl

© 2005 directed electronics, inc.7IIMMPPOORRTTAANNTT!!Do not remove the fuse holder on the red (H1/11) wire. It ensures thatthe control module has it’